Photo: Global Look PressSobesednik.ru recommends adopting a few simple rules that will help you keep your bathtub in order.
It's nice when the bath shines white and fresh. But over time, any, even the newest bathtub, gradually loses its attractive appearance. A yellowish or gray coating forms on the walls. The rusty water flowing from our taps causes brick-colored stains and stains. The bathtub looks dirty, and this is not only unpleasant, but also dangerous. On the surface of a dirty bath, various microbes, bacteria and microorganisms that love a warm and humid environment actively multiply. Therefore, by the way, an unpleasant odor may appear. There is only one conclusion: you should carefully monitor the cleanliness of the bathtub.
Be sure to clean the tub after each use. This will not take you much effort and time: just rinse the walls and bottom with warm water from the shower, and then wipe them with a terry or linen towel specially prepared for this purpose. Follow this rule strictly, and plaque on the walls will form much more slowly.
Enameled bathtubs are cleaned once a week, acrylic bathtubs – once every 2 weeks. Even if you don’t see any significant contamination yet, it’s best to stick to this schedule.
Before you start cleaning your bathtub, assess its condition. What is the main problem?
• Soap scum (formed by the use of bath products, shampoos and even regular soap).
• Lime deposits (appears as a result of high water hardness and the presence of a large amount of salts in its composition).
• Yellowing (appears as a result of high concentrations of manganese in water or due to the deposition of various oxides and plumbing biofilms due to worn-out plumbing systems).
• Rust.
When choosing a cleaning product, be sure to consider the material from which the bathtub is made! Nowadays, in ordinary apartments, two types of bathtubs are most often installed: cast iron with an enamel coating, and acrylic.
Bathtubs of this type cannot be cleaned with products that contain abrasives, various types of acids, ammonia and alcohol. You should also not use washing powder.
It is better to use special liquid and gel products. But in most cases, the bathtub can simply be wiped down with liquid soap or dishwashing detergent.
For washing, use sponges or soft cloths and never use sponges with an abrasive layer or wire wool.
Despite the fact that enamel is a wear-resistant material, you should also follow the rules when cleaning such bathtubs. Aggressive powders and liquids containing chlorine, acid, alkali should be used only in extreme cases.
A wide variety of cleaning products are available for enamel bathtubs. For regular care, it is better to use products containing baking soda, and use the rest as needed.
To thoroughly clean the bathtub, you should first wet it, then apply a cleaning agent to the surface and leave for 10-15 minutes.
You can use foam rubber or nylon sponges, nylon brushes. For a new bathtub that does not have cracks or chips, it is better to take a soft cloth. It is strictly forbidden to use sponges or brushes with metal fibers.
Apply a thick layer of homemade mustard to the rust stain and leave for 8-9 hours. Moisten the dried mustard with warm water and rub it over the surface, rinse with warm water. This product is good for any type of bath.