Factors affecting Internet access speed

Many users of MTS and other networks have to deal with a situation where the Internet speed is much lower than what was initially stated by the provider.

Most often, wireless Internet users encounter problems. This can happen for a variety of reasons, not all of which are directly related to the operator.

Reasons for deteriorating wireless Internet speed

Among the reasons that negatively affect Internet speed are:

⦁ The computer uses an outdated Wi-Fi standard that is used when connecting to the Internet. In this case, even if there is a channel of 100 Mbit in size, the user is unlikely to be able to get a speed of more than 10-20 Mbit. The problem is solved by changing the standard. It is important that the router supports it.

⦁ At a frequency of 2.4 GHz, it is impossible to achieve high connection speeds. In order to improve performance, it is recommended to increase this parameter. It is important to note that a higher frequency may not be supported by your router or computer's network card.

⦁ The speed of Internet access deteriorates significantly when you are far away from the point that distributes the signal. It is advisable that the router antenna be in direct line of sight. Numerous concrete walls or partitions negatively affect the signal quality, reducing it. For spacious rooms with low signal quality, it is recommended to replace the router with a more powerful one, and also move the antenna to the room that is used most often by residents. Several routers can also be installed simultaneously, which will completely cover the entire area.

⦁ Negatively affects the speed and location of the router. If it is located in a metal shield or just a small enclosed room, the quality invariably drops. The problem can be solved by moving the router to another location. To avoid unauthorized connection or damage to the device, it can be installed at the maximum height.

⦁ Signal quality is affected by interference caused by other equipment. These could be neighboring routers and other devices that give interference. In this case, manual installation of another channel can help.

⦁ The speed decreases when the channel capacity is low, as well as when it is heavily loaded. In this case, it will only help to use several access points, which will help relieve the channel. It is important to ensure that users are evenly distributed between channels.

⦁ Speed ​​is affected by the equipment used to connect to the Internet. The problem can only be solved by completely replacing it with a modern and high-tech one.

More information about Internet connection speed and conditions can be found on the website mts.guru , which provides complete and up-to-date information regarding access to the World Wide Web.