How to connect a computer to Wi-Fi: a simple and affordable way

Wi-Fi is so convenient that we no longer even know how we used to do without it. Today have only one device at home with the Internet access.

Almost all modern devices, whether it be laptops, smartphones or tablets, have a built-in Wi-Fi module. This allows these devices to connect without problems to an accessible network without additional adapters. However, how to connect your stationary PC to Wi-Fi, which is not equipped with such a module? Wirelesscover.ru will help you deal with the problem!

We buy a module

If your PC does not have enough module-buy it! Wi-Fi connection modules are internal and external.

Internal modules are connected to the computer directly through the motherboard, so before buying an internal module, check whether the PCI/PCI-E slot on your motherboard is free. To install the internal module, you will need tools, plus some dexterity. External modules require a free USB port for installation, and nothing more. Installing an external module is no different from installing a USB drive.

As for the cost, the internal module is available at a price of 400 rubles, and the external - from 200.

What next?

So, you have a module, a Wi-Fi Rooter with an Internet connection and a stationary PC. You can get down to business.

Without preliminary installation of special software, your PC does not recognize the module connected to it. Usually this (driver) is supplied with a disk device. If there was no disk in the kit, then go to the official website of the manufacturer and look for the right one. Pre -find out the exact name of your model. Sections with drivers are indicated by the words downloads or drivers. After downloading the file, start it and follow the instructions of the installation master.

After the system installs the software, and the device will be identified, you can connect the computer to the Internet. To do this, open the “control panel” and go to the “Networks Management Center”. In the connection list you will find a “wireless network connection”. If it is inactive, click on it with the right mouse button, and select “turn on” from the drop -down list. After that, a wireless net icon will appear on the taskbar. Click on it, find your network, and connect.

There is nothing complicated in connecting a computer to Wi-Fi, you need a little time and patience. Although sometimes the equipment does not want to work the first time, but in the end, any problem can be eliminated. Read about the possible problems and ways of their solutions on the website Wirelesscover.ru.