Metal tiles and additional elements

Metal tape is one of the most popular roofing materials used in private construction by Russian homeowners.

Since its appearance in our country-since the 90s of the last century-this option for coating the roof has not lost positions, entering the TOP-3 of the most popular roofing coatings ( here you can purchase metal tiles of one of the leading manufacturers of building materials from steel rolling-the company Metal Profile). The metal tile is preferred because this material is practical as beautiful.

If you decide to cover the roof of the building with a metal tile, then you should remember that in addition to the metal tile directly, you need additional elements. Contained elements are a group of goods without which it is impossible to make the correct installation of the roofing, achieve tightness and ensure the attractiveness of the appearance. So, below is the necessary minimum of premature elements, which cannot be dispensed with.

What additional elements will be needed when coating the roof with a metal tile?

Before shend to the description of the necessary components and explanation for which they “answer”, say that the entire range of additional elements is made from the same material as the roofing directly. That is, in the case of metal tiles, the main material is a steel galvanized rental, covered with a polymer composition (or powder paint).

So, the set of components for the roof covered with metal tiles is minimal, consists of:

Skate planks. This element is needed to fasten the joints of roofing, as well as to ensure tightness in the joints. Skate strips can have a different shape. Such a variety allows you to choose the best option for a roof of one or another form. Endovaya. Such components are necessary in order to ensure tightness in places of joints of slopes, which form an internal or outer corner (depending on the shape of the roof), therefore, the values ​​can be internal or external. Blood planks, end, cornice. Despite the variety of planks presented, they are united by one function: they are used to ensure tightness in those places where the metal tile is in contact with various vertical surfaces, for example, with a chimney or walls.

Well, it is worth noting that in addition to purely practical properties, the whole variety of additional elements and components is important from a decorative point of view: they are able to hide the possible flaws of installation of metal tiles and give the roof a neat appearance.