Malfunctions of nozzles of HBO

GPO gas nozzles belong to elements experiencing a constant operational load, so they wear relatively quickly.

The duration of the service of these important elements usually corresponds to the resource declared by the manufacturer. You can get acquainted with the details of the nozzles of HBO from world manufacturers by the link: https://farre.com.ua/forsunki-forsunki/ .

Signs of malfunctions of gas nozzles

Often, car owners are faced with a phenomenon such as the “tag” of the engine at the time of its operation on gas fuel. This effect is characteristic of two situations: there is no gas or there is no spark.

First of all, it is necessary to determine which of the cylinders failed. To do this, squeeze the gas supply hose from the nozzle to the place of the insert on each “boiler”. The problem cylinder will be the one on which, when the hose is transferred, the nature of the engine operation on gas combustible does not change.

If it turned out that everything is fine with the BB and the candle, then the “troop” is provoked by the failed nozzle. In the propane-butane mixture there are always gasoline resinous substances. For the engine, such substances are absolutely harmless, and for a rod located inside the nozzle, a lip -shaped substance is dangerous. The tarry layer makes it difficult to move the rod, thereby leading to the combustion of the coil or freezing the rod.

Ways to restore the performance of the nozzle

The possibilities of returning the gas nozzle to working condition are quite limited, since the devices are:

• Whole -and -body - the only accessible repair procedure - washing the nozzle on the stand with a special tool;

• Clear - manually clean the elements of the device and replace worn parts with new from the remote control.

How to extend the life of a gas nozzle

In most cases, nozzles of HBOs are not amenable to repair, so more often it is necessary to install new ones, which is actually considered more reliable.

The following recommendations will help to avoid an unpleasant situation:

• Install a high -quality and reliable filter of fine cleaning, and be sure to change the consumable to the new one every 10,000 km of run;

• It is preferable to install filters that have a sump and a filtering element of synthetic material;

• You should refuse to buy paper filters that are ineffective and completely unable to cope with their task;

• Regularly flushing the nozzles.

A wide selection of gas -filled equipment from small components to full sets of all generations of the State Budgetary Institution is presented at the link: https://farre.com.ua/shop/ .

The proposed tips are also relevant for gasoline nozzles, in which the principle is similar to gas nozzles.