Features of the use of scanes

In order to create a smooth and even surface inside the formed hole, a scan is used.

Smalls are metal -cutting tools that are used in order to achieve maximum accuracy of the hole in the metal.

Basic forms and types of scanes

There are the following types of scanes:

-Cylindical scanes are used to process conventional holes, round in shape;

• Concular scanes look in the form of a cone, with a cut vertex. The hole after processing acquires the cone shape;

-Settnaya meet very rarely. It is used to work with sheet material.

The design is distinguished:

-clorine scan has a monolithic structure;

-In.

By the method of use, there may be:

-class;

-Mashny.

Manual scanes have a small diameter that reaches 50 mm. On the tail, it has a square profile for fixing. As for the machine scanning, it has a large thickness and is inserted into the machine. The tail is conical or cylindrical.

How to make the right choice of scanes

It is very difficult to choose one scan that is suitable for all occasions. It is important to consider:

-What work you have to do. If this is handmade, then it is best to choose a scan with a square shank. And if the work will be held on the machine, then it is worth choosing a cylindrical or conical scan;

-To use the scan in a fairly deep hole, you can choose a nozzle scan with a more elongated frame.

-If you constantly use scanes in your work, then it is best to immediately purchase a set in which the main types of scanes will be presented.

During the use of scanes, it is important to remember that their teeth can grind, as a result of which the diameter of the tool may decrease. For more accurate work, it is necessary to periodically replace this tool.

Given that the scan is a fairly expensive tool, it is important to correctly store it and take care of it. Of course there are inexpensive options that are easy to replace. But if we are talking about more expensive options, your task is to extend the work as long as possible. It is important that moisture and raw air does not fall on its surface. It is important to store tools in special boxing. After use, it is important to clean the scan of lubrication or chips that stuck.

Whatever scanes you want to purchase, you will definitely find it in the Mikron store. A large selection of tools and measuring instruments.